FREEDOMs Tatra 813 Kolos (Cross-RC DC8)
- FREEDOM83
- Pro Member
- Berichten: 317
- Lid geworden op: 08 jun 2020 15:49
- Locatie: Vitoria
- Gegeven waarderingen: 271 keren
- Ontvangen waarderingen: 224 keren
FREEDOMs Tatra 813 Kolos (Cross-RC DC8)
Finally, after years behind, before even releasing Cross-RC, I wanted it since I tried Spintires in 2009, I wanted something like this and I was finally able to buy it:
This is evidenced by the weight of the box: 12.9 kg, light as a feather hahahaha
As you can imagine, I will post photos and more of the assembly, I want to do an unboxing, and if I can I will record the assembly process, at least the mechanics.
This is evidenced by the weight of the box: 12.9 kg, light as a feather hahahaha
As you can imagine, I will post photos and more of the assembly, I want to do an unboxing, and if I can I will record the assembly process, at least the mechanics.
Laatst gewijzigd door FREEDOM83 op 03 dec 2023 20:04, 1 keer totaal gewijzigd.
- FREEDOM83
- Pro Member
- Berichten: 317
- Lid geworden op: 08 jun 2020 15:49
- Locatie: Vitoria
- Gegeven waarderingen: 271 keren
- Ontvangen waarderingen: 224 keren
Re: FREEDOMs Tatra 813 Kolos (Cross-RC DC8)
I took photos of all the bags, but I won't post them, I don't think they are very interesting hahahaha. I have seen much better ordered kits, to be honest, although I have also seen worse ones, we will see how things go with the assembly for now...
The wheels, as I already read in the forum , are difficult to heel, very very tight, and there is plenty of foam, so first, cut the foam a little:
And a little more than two hours later, I managed to assemble 4 of the 8 wheels, hard work, first with long screws almost to the stop and by wetting my lips very well to get the beads on, without wetting, impossible, but hey, here's the fun hehehehe:
Honestly, the assembly is what I like the most, but the truth is that it is very easy to make the wheels bead easier, not because the brands don't do it many times.
The wheels, as I already read in the forum , are difficult to heel, very very tight, and there is plenty of foam, so first, cut the foam a little:
And a little more than two hours later, I managed to assemble 4 of the 8 wheels, hard work, first with long screws almost to the stop and by wetting my lips very well to get the beads on, without wetting, impossible, but hey, here's the fun hehehehe:
Honestly, the assembly is what I like the most, but the truth is that it is very easy to make the wheels bead easier, not because the brands don't do it many times.
- coopertje
- Site Admin
- Berichten: 1192
- Lid geworden op: 27 mei 2020 11:51
- Locatie: Eindhoven
- x 1
- Gegeven waarderingen: 527 keren
- Ontvangen waarderingen: 612 keren
- wesley
- Donateur
- Berichten: 407
- Lid geworden op: 24 jun 2019 20:45
- Locatie: loon op zand
- x 3
- Gegeven waarderingen: 93 keren
- Ontvangen waarderingen: 275 keren
- FREEDOM83
- Pro Member
- Berichten: 317
- Lid geworden op: 08 jun 2020 15:49
- Locatie: Vitoria
- Gegeven waarderingen: 271 keren
- Ontvangen waarderingen: 224 keren
Re: FREEDOMs Tatra 813 Kolos (Cross-RC DC8)
The 8 wheels are already mounted
And yes, the instructions are missing some bearings that do come in the kit, the front ones are the ones in the photos, you realize they are missing, but in the rear ones they are the ones that go behind the crown inside the tip of the axle, Unless I read it in the forum, otherwise I would have to disassemble it again and it would be a tedious task.
Today I started with the matter, the extra bumper and the axles and some details, I leave you photos:
Here's a ball joint that came half the size hehehe less, which is something we have plenty of
And here is today's work
And yes, the instructions are missing some bearings that do come in the kit, the front ones are the ones in the photos, you realize they are missing, but in the rear ones they are the ones that go behind the crown inside the tip of the axle, Unless I read it in the forum, otherwise I would have to disassemble it again and it would be a tedious task.
Today I started with the matter, the extra bumper and the axles and some details, I leave you photos:
Here's a ball joint that came half the size hehehe less, which is something we have plenty of
And here is today's work
- FREEDOM83
- Pro Member
- Berichten: 317
- Lid geworden op: 08 jun 2020 15:49
- Locatie: Vitoria
- Gegeven waarderingen: 271 keren
- Ontvangen waarderingen: 224 keren
Re: FREEDOMs Tatra 813 Kolos (Cross-RC DC8)
Well, so far with the servos and the 1200kv fusion, it's 7.4kg, the thing weighs hehehe, everything is very tight, removing a defect in the chassis that I will show later and readjusting the front leaf springs:
- Deze gebruikers waarderen FREEDOM83 voor dit bericht:
- TerpstraAJ (18 nov 2023 06:23)
- coopertje
- Site Admin
- Berichten: 1192
- Lid geworden op: 27 mei 2020 11:51
- Locatie: Eindhoven
- x 1
- Gegeven waarderingen: 527 keren
- Ontvangen waarderingen: 612 keren
- FREEDOM83
- Pro Member
- Berichten: 317
- Lid geworden op: 08 jun 2020 15:49
- Locatie: Vitoria
- Gegeven waarderingen: 271 keren
- Ontvangen waarderingen: 224 keren
Re: FREEDOMs Tatra 813 Kolos (Cross-RC DC8)
Thanks for watching hehehehe , now slowly work , paintjob ...
-
- Donateur
- Berichten: 495
- Lid geworden op: 08 feb 2019 20:34
- Locatie: Zoetermeer
- x 5
- Gegeven waarderingen: 221 keren
- Ontvangen waarderingen: 94 keren
Re: FREEDOMs Tatra 813 Kolos (Cross-RC DC8)
Love these builds!
Played mudrunner myself, this truck is on my list to build
Thanks for sharing.
Played mudrunner myself, this truck is on my list to build
Thanks for sharing.
- Deze gebruikers waarderen TerpstraAJ voor dit bericht:
- FREEDOM83 (20 nov 2023 09:25)
Auke
- Trx4 sport kit Chevy C10
- Injora scx10-2 jeep
- SCX10-2 Raw builders kit Hilux
- SCX24 Chevy C10
- TRX-4M Landrover Defender Green
- Trx4 sport kit Chevy C10
- Injora scx10-2 jeep
- SCX10-2 Raw builders kit Hilux
- SCX24 Chevy C10
- TRX-4M Landrover Defender Green
Wie is er online
Gebruikers op dit forum: Geen geregistreerde gebruikers en 7 gasten