Jiefang CA-30 King Kong 6x6 (Zil 157)
- FREEDOM83
- Pro Member
- Berichten: 340
- Lid geworden op: 08 jun 2020 15:49
- Locatie: Vitoria
- Gegeven waarderingen: 284 keren
- Ontvangen waarderingen: 241 keren
Jiefang CA-30 King Kong 6x6 (Zil 157)
Hello again !!
We are starting with public works, it will be a dump truck, but a crawler chassis, so I'll put the thread here if you don't mind. I wanted to have taken the DoubleE Volvo ec160c, I had it brand new in Italy in the store for 580 with shipping, but after spend this weekend trying others from some friends and making "diorama" in each of the friend next to the crawler circuit, and definitely, the excavator is not my thing, in less than 30 minutes I was bored of putting buckets, not so with the truck making trips , so I changed line and I'm going to build a dump truck, but with a chassis that allows me "something more" than the tamiya, which are very beautiful, but where we are going to go they will be somewhat "orthopedic".
It all started when a "bad friend" hahahaha gave me this Bruder cabin... :
[ /url]
The chosen chassis is the King Kong 6x6, full metal with crossbows etc and at a good price I think, I'll see the qualities, but what I've read in forums, it's not bad at all:
[url=https://servimg.com/view/18949632/1457]
According to what I have measured, it should be more or less good, we'll see when everything arrives hehehehe
[url=https://servimg.com/view/18949632/1461][ /url]
[url=https://servimg.com/view/18949632/1462][ /url]
And for the tipper, I will also use the Bruder brand, this bathtub that I will adapt to the chassis, and the trailer I will use to transport a Bobcat that I will take to improve a bit as well of course.
[url=https://servimg.com/view/18949632/1459][ /url]
And the bobcat that a friend already has and although he has to improve it, for the price it has it is curious:
[url=https://servimg.com/view/18949632/1460][ /url]
We are starting with public works, it will be a dump truck, but a crawler chassis, so I'll put the thread here if you don't mind. I wanted to have taken the DoubleE Volvo ec160c, I had it brand new in Italy in the store for 580 with shipping, but after spend this weekend trying others from some friends and making "diorama" in each of the friend next to the crawler circuit, and definitely, the excavator is not my thing, in less than 30 minutes I was bored of putting buckets, not so with the truck making trips , so I changed line and I'm going to build a dump truck, but with a chassis that allows me "something more" than the tamiya, which are very beautiful, but where we are going to go they will be somewhat "orthopedic".
It all started when a "bad friend" hahahaha gave me this Bruder cabin... :
[ /url]
The chosen chassis is the King Kong 6x6, full metal with crossbows etc and at a good price I think, I'll see the qualities, but what I've read in forums, it's not bad at all:
[url=https://servimg.com/view/18949632/1457]
According to what I have measured, it should be more or less good, we'll see when everything arrives hehehehe
[url=https://servimg.com/view/18949632/1461][ /url]
[url=https://servimg.com/view/18949632/1462][ /url]
And for the tipper, I will also use the Bruder brand, this bathtub that I will adapt to the chassis, and the trailer I will use to transport a Bobcat that I will take to improve a bit as well of course.
[url=https://servimg.com/view/18949632/1459][ /url]
And the bobcat that a friend already has and although he has to improve it, for the price it has it is curious:
[url=https://servimg.com/view/18949632/1460][ /url]
Laatst gewijzigd door FREEDOM83 op 01 feb 2023 15:03, 2 keer totaal gewijzigd.
- coopertje
- Site Admin
- Berichten: 1215
- Lid geworden op: 27 mei 2020 11:51
- Locatie: Eindhoven
- x 1
- Gegeven waarderingen: 541 keren
- Ontvangen waarderingen: 622 keren
- FREEDOM83
- Pro Member
- Berichten: 340
- Lid geworden op: 08 jun 2020 15:49
- Locatie: Vitoria
- Gegeven waarderingen: 284 keren
- Ontvangen waarderingen: 241 keren
Re: Jiefang CA-30 King Kong 6x6 (Zil 157)
Some photos of how it comes:
The detailed leaf springs , a sheet of metal, the others made of plastic:
The links of the two rear axles:
The transfer and reducer , pinions and bases are metal with plastic casings:
Some of the center shafts , all metallic and with good appearance:
beadlock rims 1.75 :
And the axles, heavy, and although I will open them to lubricate them, the two rear ones need to be adjusted a bit, as well as the front one is super smooth, but I will also open it to control and lubricate. The front shafts look very good too:
And the instructions, all in Chinese, although with the measurements of the screws and the drawings it is enough to assemble everything:
And some tools that he brings, for the hub nuts and the scale bolts:
The detailed leaf springs , a sheet of metal, the others made of plastic:
The links of the two rear axles:
The transfer and reducer , pinions and bases are metal with plastic casings:
Some of the center shafts , all metallic and with good appearance:
beadlock rims 1.75 :
And the axles, heavy, and although I will open them to lubricate them, the two rear ones need to be adjusted a bit, as well as the front one is super smooth, but I will also open it to control and lubricate. The front shafts look very good too:
And the instructions, all in Chinese, although with the measurements of the screws and the drawings it is enough to assemble everything:
And some tools that he brings, for the hub nuts and the scale bolts:
- coopertje
- Site Admin
- Berichten: 1215
- Lid geworden op: 27 mei 2020 11:51
- Locatie: Eindhoven
- x 1
- Gegeven waarderingen: 541 keren
- Ontvangen waarderingen: 622 keren
-
- Member
- Berichten: 59
- Lid geworden op: 27 apr 2022 14:53
- Locatie: Oosterhout
- Gegeven waarderingen: 4 keren
- Ontvangen waarderingen: 34 keren
Re: Jiefang CA-30 King Kong 6x6 (Zil 157)
That is a very cool project you are working on.
Good luck!
Good luck!
- Traxxas Ford F150 High Trail Black Edition.
- Traxxas Trx-4 79' Bronco.
- Traxxas Slash 4x4 Ultimate.
- FTX Outback Ranger II
- 2x Kyosho Fazer (Impreza & Lancer).
- Hsp Leopard Nitro.
- Amewi Double Bridge Crawler.
- Zelfbouw Car Trailer.
- Traxxas Trx-4 79' Bronco.
- Traxxas Slash 4x4 Ultimate.
- FTX Outback Ranger II
- 2x Kyosho Fazer (Impreza & Lancer).
- Hsp Leopard Nitro.
- Amewi Double Bridge Crawler.
- Zelfbouw Car Trailer.
Wie is er online
Gebruikers op dit forum: Geen geregistreerde gebruikers en 4 gasten